A battery powered independent IR light sensor (not included in kit).
|TRIGGER TIME: |
Selectable for 5ms (1/200 sec.) to 5 seconds
|DELAY TIME: |
Short delay 1ms (1/1000 sec.) to 100ms (1/10 sec.) - Long delay 1000ms (1/10 sec.) to 10 seconds.
|TRIGGER MODES: |
Manual, auto 1 shot, auto re-arm.
|FOCUS ACTIVATION: |
|SENSOR MODES: |
Flash, infra-red beam, sound.
|IR BEAM: |
Range 20cm to 2m. Wavelength 850 nm.8 degrees or 2 degrees with focal baffle.
|FLASH SENSOR: |
Range 1 to 1500 lumens. Sensitivity 10 lumens.
|SOUND RESPONSE: |
Microphone sensitivity frequency response 50 to 5000 Hz.
|TRIGGER OUTPUTS: |
x3 open collector (x2 trigger, x1 focus). 50 v DC max at 100 milliamps.
|POWER REQUIREMENTS: |
x4 AA batteries, high power type, non-rechargeable - AC to low voltage PSU 6 to 9 VDC at 100 milliamps. MP1 Mains power unit recommended.
|POWER CONSUMPTION: |
About 40 milliamps. When IR TX module is connected this rises to 80 milliamps.
Controller - (W)19cm x (D)14cm x (H)5cm Sensors (W)7.5cm x (D)5cm x (H)2.6cm.
|SENSOR MOUNTING: |
1/4 inch UNC thread (standard tripod thread).
|MINI TRIPOD HEIGHT: |
8 cm min. 17 cm max.
MCT-1 Controller 325g. Sensors 43g. Tripods 33g. Kit 950g.
0 to 35 degrees C (operating). -10 to 50 degrees C (non-operating).
|Connection to camera: Many cameras will connect to the TriggerSmart MCT-1 with the cable provided in the kit. Some cameras will need other dedicated cable connections. Please view the controller/camera connections and the cabling optionsdocuments for full details. |
This product is available via special order and may take upto 5 working days